Some YouTube Tricks

1. View high quality videos
Youtube gives you the option to switch to high quality videos for some of the videos, however you can check if a video is available in high quality format by appending ‘&fmt=18′(stereo, 480 x 270 resolution) or ‘&fmt=22′(stereo, 1280 x 720 resolution) for even higher quality.

2. Embed Higher Quality Videos
While the above trick works for playback, if however you want to embed hig quality videos you need to append “&ap=%2526fmt%3D18″ and “&ap=%2526fmt%3D22″ to the embed url.

3. Cut the chase and link to the interesting part
Linking to a video where the real action starts at 3 minutes 22 seconds, wondered if you could make it start at 03:22? You are in luck. All you have to do is add #t=03m22s (#t=XXmYYs for XX mins and YY seconds) to the end of the URL.

4. Hide the search box
The search box appears when you hover over an embedded video. To hide the search box add ‘&showsearch=0′ to the embed url.

5. Embed only a part of Video
Just append ‘&start=30′ to skip first 30s of the video. In general you can modify the value after start= to the number of seconds you want to skip the video for.

6. Autoplay an embedded video
Normally when you embed a Youtube video and load the page, the player is loaded and it sits there waiting for you to hit the play button. You can make the video play automatically by adding ‘&autoplay=1′ to the url part of the embed code.

7. Loop an embedded video
Append ‘&loop=1′ to make the video start again without user intervention after it reaches the end.

8. Disable Related Videos
Publishing your content in the form of Youtube video? Don’t want people to see other people’s content that may be related but may as well be in competition to you? Just add ‘&rel=0′ to the end of the url part of the embed code and you just turned off the related video suggestions!

9. Bypass Youtube Regional Filtering
Some videos are only available in certain parts of the world. Your IP Address is used to determine your location and then allow or deny access to the video. Change the url from http://www.youtube.com/watch?v= to http://www.youtube.com/v/

10. Download Video
Although not inherently a youtube trick but useful all the same for downloading videos. Just change youtube to kickyoutube in the url of the video and it will take you to kickyoutube.com with all the options for downloading the video you were watching.

How to change the Admin password using the user account

For this just open ur command prompt

type " net user "
it will give the all the users
then type " net user administrator * "
(Administrator is default admin for all the computer systems having the very strong password)

then it will give you
"type a new password for this user"
type in the password and press enter
(Note :- the password which youll be typing will be invisible plz type correctly as it not visible and then reenter and press enter)


then log off and loging using the admin username as
Administrator
and the given password
and youll be loging in with admin rights.

To Make ur more prtected ur PC

Many wud know about BIOS password and logon password

There is also another startup password for more protection

1)Open Run and type syskey
2)A "Securing the windows....." window will open.
3)Click on update button and in the opening window select password start password
4)Give a password.

This will create another password for statrup

To show Hidden files

There is a simple registry entry which can solve your problem.
1)Go to Start|Run
2)type regedit

3)Go to the path given below

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden\SHOWALL

4)There you will find

CheckedValue REG_DWORD 0x00000001(2)
DefaultValue REG_DWORD 0x00000002(2)

5)Change CheckedValue value from 2 to 1

i.e.CheckedValue REG_DWORD 0x00000001(1)

It will work

Join file with command prompt

First: lets say you have 3 videos in your hardrive root: dbilla****1.mpg, dbilla****2.mpg and dbilla****3.mpg just rename them to 1, 2, and 3 (just the number and take off the extension)

Second: go on start menu, click on run and type cmd and press enter

Third: now type your hardrive letter (ie: C)

Fourth: Type: Copy /b 1 + 2 + 3 dbilla****.mpg
and click enter

Fifth now wait till you see: 1 files copied.
C:>

And type exit and press enter and you are done!

Start ur system automatic on time

Many of u have night unlimited connection and want to schedule the machine by night so that u dont have to wake up by night.

U can make ur system to turn up automatically.

Steps:
1. Go to bios
2. Go to power tab
3. There u will found options as follows
wake up from s5----------------intel mb
wake up from irc alram------asus
4. Enable the option
5. Give ethe specified time
6. Press f10

u r done.. Now just schedule ur dialer by putting them on startup by night and also if u desire to have torrent download put it also at start up.
Make the main power on and keep monitor off
have ur download by morning

Finding IP Address Of the Sender In Hotmail, Yahoo, Gmail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender.

Finding IP Address Of the Sender In Hotmail
# Log into your Hotmail account with your username and password.
# Click on the Mail tab on the top.
# Open the mail.
# If you do not see the headers above the mail message, your headers are not displayed . To display the headers,

* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked.
* Click on Ok button
* Go back to the mails and open that mail.

# If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP address

* Hotmail headers : dbilla ,In this case the IP address of the sender is [68.34.60.59]. This is be the IP address of the sender.

# If you find a header with Received: from followed by a Gmail proxy like this

* Hotmail headers : dbilla
* Look for Received: from followed by IP address within square brackets[]. In this case, the IP address of the sender is [69.140.7.58].

# Or else if you have headers like this

* Hotmail headers : dbilla
* Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] .

# If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.


Finding IP Address of the sender in Yahoo Mail
# Log into your Yahoo! mail with your username and password.
# Click on Inbox or whichever folder you have stored your mail.
# Open the mail.
# If you do not see the headers above the mail message, your headers are not displayed . To display the headers,

* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail.

# You should see similar headers like this:

* Yahoo! headers : dbilla

# Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
# That is be the IP address of the sender!

Finding IP Address of the sender in Gmail
* Log into your Gmail account with your username and password.
* Open the mail.
* To display the headers,
o Click on More options corresponding to that thread. You should get a bunch of links. Click on Show original
* You should get headers like this:
o Gmail headers : dbilla
* Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is 65.119.112.245.
* That is be the IP address of the sender!!

Share internet between pc and main PC get internet from Mobile

To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.
On the host computer
On the host computer, follow these steps to share the Internet connection:
1. Log on to the host computer as Administrator or as Owner.
2. Click Start, and then click Control Panel.
3. Click Network and Internet Connections.
4. Click Network Connections.
5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
6. Click Properties.
7. Click the Advanced tab.
8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
10. Click OK. You receive the following message:
When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
address 192.168.0.1. Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, it is a good idea to set them to obtain their IP addresses automatically. Are you sure you want to enable Internet Connection Sharing?
11. Click Yes.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

On the client computer
To connect to the Internet by using the shared connection, you must confirm the LAN adapter IP configuration, and then configure the client computer. To confirm the LAN adapter IP configuration, follow these steps:
1. Log on to the client computer as Administrator or as Owner.
2. Click Start, and then click Control Panel.
3. Click Network and Internet Connections.
4. Click Network Connections.
5. Right-click Local Area Connection, and then click Properties.
6. Click the General tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties.
7. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically (if it is not already selected), and then click OK.

Note You can also assign a unique static IP address in the range of 192.168.0.2 to 192.168.0.254. For example, you can assign the following static IP address, subnet mask, and default gateway:
IP Address 192.168.0.2
Subnet mask 255.255.255.0
Default gateway 192.168.0.1
8. In the Local Area Connection Properties dialog box, click OK.
9. Quit Control Panel.
If client machine having windows 98 and then stop here..
If client machine having windows xp then
10. Enter DNS server address (u can find it in main gateway PC using run>cmd>ipconfig /all )
11. DNS server name you have to enter in TCP/IP setting..

How to Remove the Popup Ads in Avira Antivirus Free Edition

Windows 2000 / Windows XP Pro


1.Go to Start > Run.
2.Type gpedit.msc and click OK.
3.Navigate through User Configuration > Administrative Templates > System.
4.Double click "Don't run specified Windows applications".
5.Enable it and click show.
6.Add "avnotify.exe".
7.Click OK on all open windows.
8.Restart.

Windows 7 or Windows Vista Business/Ultimate


1.Open the control panel through Start > Control Panel.
2.Go to Administrative Tools > Local security policy.
3.Click on Software Restriction Policy > Action > Create new restriction policy.
4.Right-click, and go to additional rules > new path rule.
5.Click Browse and navigate to C:\Program Files\Avira\AntiVir Desktop\ and double-click avnotify.exe.
6.Set the security level to Disallowed.
7.Click apply and OK.

Windows Vista Home 64-Bit


1.Go to C:\Program Files (x86)\Avira\AntiVir Desktop\avnotify.exe for the current version, 9. For earlier versions, go to C:\Program Files\Avira\AntiVir PersonalEdition Classic\avnotify.exe.
2.Right-click avnotify.exe and go to Properties > Security.
3.Under the group or username SYSTEM, click edit.
4.Put a checkmark under the DENY column for "read and execute".

Windows Vista Home 32-Bit


1.Go to C:\Program Files\Avira\AntiVir Desktop\avnotify.exe for the current version, 9. For earlier versions, go to C:\Program Files\Avira\AntiVir PersonalEdition Classic\avnotify.exe.
2.Right-click avnotify.exe and go to Properties > Security.
3.Under the group or username SYSTEM, click edit.
4.Put a checkmark under the DENY comlumn for "read and execute".

Lock Your Computer on Mouse Click

Instead of pressing CTRL+ALT+DEL or windows + L to lock your machine you can create an icon to lock your machine. There are very simple steps by using it you can simply lock your computer
using single mouse click.


Just Follow the simple step >>

1. Right click

an empty spot on the desktop, point to New and click Shortcut.

2. In the Create Shortcut dialog box, type the following in the 'Type the location' of the item text box:

rundll32 user32.dll,LockWorkStation



3. Click Next

4. In "Type a name for this shortcut", type "" (any name as u wish) and Click Finish

5. This will Create a shortcut in your Desktop.

6.Now each time when you want to lock the computer , Just click on this shortcut